86Xx Emulation Mode, Select; Advanced Mode, Select; Alphanumeric Field Separator - Intermec EasyCoder 4100 User Manual

Helvitica condensed 9 pt italic
C o d e 3 9

86XX Emulation Mode, Select

Purpose:
Default:
Syntax:
Notes:

Advanced Mode, Select

Purpose:
Syntax:
Notes:

Alphanumeric Field Separator

Purpose:
Syntax:
Notes:
1 8 p t
Instructs the printer to operate in 86XX Emulation mode.
n=0
<ESC>c{n}
n=1 specifies emulation with 15 mil (0.015 inch) dot size for
bar codes only (other fields are in the 10 mil dot size).
n=0 specifies 10 mil (0.010 inch) dot size.
The field pointer designates the first field in format 0.
The page select command is disabled and all previously
host entered data is lost.
Instructs the printer to operate in Advanced mode.
<ESC>C
The field pointer designates the first field in format 0. Page
0 is the default page.
All data host entered before switching operating modes is
lost.
Increments or decrements alphanumeric characters within
a field-separated region. The data must be enclosed
between two sets of <GS> commands:
<GS>data<GS>
<GS>
Alphanumeric characters are 0 to 9 and A to Z.
The order of the characters is as follows:
0, 1, 2.....8, 9, A, B, C......Y, Z, 0, 1....9, A, B.....
You may have more than one region in a field as long as
they do not overlap. Each region is independently
incremented or decremented according to the increment or
decrement value specified for the field.
7
Printer Commands
7-19