Table of Contents
Advertisement
Alarm Ports
Figure 2: IR8340 Router Front Panel
1
2
3
4
5
6
7
8
Alarm Ports
The router has two alarm inputs and one alarm output.
Alarm Input
The alarm input is a dry-contact alarm port. You can connect up to two alarm inputs from devices, such as a
door, a temperature gauge, or a fire alarm, to the alarm port. You can use the CLI to set the alarm severity to
minor, or major. An alarm generates a system message and turns on an LED. See
page 11
Cisco Catalyst IR8340 Rugged Series Router Hardware Installation Guide
2
Four 10/100/1000Base-T PoE/PoE+/UPoE
LAN ports
Four 100/1000 SFP LAN ports (top)
Four 10/100/1000 Base-T LAN ports
(bottom)
Four 100/1000 SFP LAN ports
Two 100/1000 SFP WAN ports (top)
Two 10/100/1000 Base-T WAN ports
(bottom)
mSATA module slot
Timing module slot
SD flash card slot
System and port LEDs
for the LED descriptions.
9
Grounding point
10
Power input terminal
11
USB port
12
Console port
13
Alarm port
14
Two PIM slots
15
Two IRM-NIM slots
Cable Side View LEDs, on
Product Overview
Advertisement
Table of Contents
