Wi-Fi Module; Gigabit Ethernet Combo Port; Gigabit Ethernet Copper Ports - Cisco Catalyst IR1800 Series Installation Manual

Wi-Fi Module

Gigabit Ethernet Distance
SFP
GLC-ZX-SM-RGD 70 km
SFP-GE-S 220-550 m
SFP-GE-L 550 m/10
km
SFP-GE-Z 70 km
Table 4: Supported Fast Ethernet SFPs
Fast Ethernet SFP Distance
GLC-FE-100FX-RGD 2 km
GLC-FE-100LX-RGD 10 km
For the most up-to-date list of supported SFP models for Cisco Industrial Ethernet switches,
see:https://tmgmatrix.cisco.com/
Wi-Fi Module
The Wi-Fi module is expected to be supported in a future software release.

Gigabit Ethernet Combo Port

The IR1800 supports a single combo fiber and copper port (SFP/RJ45). The SFP supports standard 1000Base-X
or 100Base-FX Ethernet over single-mode or multi-mode optics. Industrial SFPs must be used for the system
to meet the operating temperature from -40C —+60C. If commercial or extended temperature grade of SFP is
used, the system's operating temperature must be derated.

Gigabit Ethernet Copper Ports

The IR1800 has four RJ-45 copper ports. These copper ports support standard 3-speed, 10/100/1000Base-T
Ethernet features, including automatic medium-dependent interface crossover (auto-MDIX), forced or auto
negotiation of speed and duplex, fast link drop, and cable diagnostics.
Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide
18
Fiber Commercial
0C to +70C
SMF —
MMF —
MMF/SMF —
SMF —
Fiber Commercial Extended
0C ~ +70C -5C ~
+85C
MMF — —
SMF — —
Extended Industrial Digital Optical Monitoring
-5C to -40C to
+85C +85C
— YES YES
YES — YES
YES — YES
YES — YES
Industrial Digital Optical Monitoring
-40C ~
+85C
YES —
YES —
Product Overview