Save Your Device Configuration; Save Backup Copies Of Configuration And System Image - Cisco 4000 Series Hardware Installation Manual

Integrated services routers
Hide thumbs Also See for 4000 Series:
Table of Contents

Advertisement

Verify Network Connectivity
The following display shows sample output for the ping command when you ping the IP hostname
donald:
Router# ping donald
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.7.27, timeout is 2 seconds:
!!!!!
Success rate is 100 percent, round-trip min/avg/max = 1/3/4 ms

Save Your Device Configuration

This section describes how to avoid losing your configuration at the next system reload or power cycle
by saving the running configuration to the startup configuration in NVRAM. The NVRAM provides
256KB of storage on the router.
SUMMARY STEPS
1.
2.
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Router> enable
Step 2
copy running-config startup-config
Example:
Router# copy running-config startup-config

Save Backup Copies of Configuration and System Image

To aid file recovery and minimize downtime in case of file corruption, we recommend that you save
backup copies of the startup configuration file and the Cisco IOS-XE software system image file on a
server.
Hardware Installation Guide for Cisco 4000 Series Integrated Services Routers
4-20
enable
copy running-config startup-config
Chapter 4
Configure Initial Router Settings on Cisco 4000 Series ISRs
Purpose
Enables privileged EXEC mode. Enter your password if
prompted.
Saves the running configuration to the startup
configuration.
OL-32185-02

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents