Table of Contents
Advertisement
Wireless-B Broadband Router
The Wireless Tab - Wireless Network Access
Wireless network access can be filtered by using the MAC addresses of the wireless devices transmitting within
your network's radius.
Wireless Network Access. (See Figure 5-18.) If you select Allow All, all computers will be allowed access to the
wireless network. To restrict access to the network, select Restrict Access. Click the Wireless Client MAC
Address button, and the screen in Figure 5-19 will appear.
Select the MAC Address from the list and click the Select box, then click the Select button.
Click the Refresh button if you want to refresh the screen. Click the Close button to return to the previous screen.
When finished making your changes on this tab, click the Save Settings button to save these changes, or click
the Cancel Changes button to undo your changes.
Chapter 5: Configuring the Wireless-B Broadband Router
The Wireless Tab - Wireless Network Access
Figure 5-18: Wireless Tab - Wireless Network Access
Figure 5-19: Wireless Tab - Wireless Client MAC List
19
Advertisement
Table of Contents
