Coolant; Adding Coolant - Segway SGW570F-A3 Manual

MAINTENANCE

COOLANT

The coolant circulates in the engine cooling system,
taking away the excess heat generated during the engine
operation and making the engine operate at normal
operating temperature. Maintaining the coolant will allow
the cooling system to work properly and prevent freezing,
overheating, and corrosion. Therefore, the coolant should
be frequently checked. The factory provides a 50/50
solution of antifreeze and water in this ATV. This coolant
solution is recommended for most operating temperatures
and provides good corrosion protection.

Adding Coolant

The recovery bottle is located on the left side of the vehicle.
1. Observe the liquid level in the bottle
2. If the liquid level is low, remove the cap and add coolant
as needed. Maintain the coolant level between the
2
minimum and maximum
(when the liquid is cool).
3. Remove the front panel maintenance cover in the
middle area of the front upper part of the vehicle (see
page 110);
4. Unscrew the lid, pour in new coolant. Pay attention to
the position of the coolant when pouring in, and do not
exceed the maximum liquid level
5. Tighten the lid of the cooling bottle
1
marks on the bottle
124