Coolant; Adding Coolant - Segway Snarler AT6 S User Manual

COOLANT

The coolant circulates in the engine, taking away the
excess heat generated during the engine operation and
making the engine operates at normal temperature
range. Maintaining the coolant will allow cooling system
to work properly and prevent freezing, overheating, and
corrosion. Check coolant level frequently.
according to mixing instructions of the coolant liquid used.
The coolant needs to be mixed to suit your operating
conditions. If you use your ATV in extreme climatic
conditions, mixing ratio should be adjusted accordingly.
Use only distilled or demineralized water for mixing.

Adding coolant

The recovery bottle is located on the left side of the vehicle.
1. Observe the coolant level in recovery bottle.
2. If the coolant level is low, remove the cap and add
coolant as needed. Maintain the coolant level
between minimum
bottle (when coolant is cool).
3. Remove front maintenance panel (see Page 120);
4. Unscrew the cap, pour in new coolant. Pay attention
to the coolant level, do not exceed the maximum mark.
5. Reinstall the recovery bottle cap.
MAINTENANCE
and maximum
2
129
Mix antifreeze
marks on the
1