Coolant; Cooling Bottle Coolant - Segway Villain SX10 Owner's Manual

The coolant circulates in the engine through the cooling system, taking away
the excess heat generated during the engine operation and making the engine
operate at normal operating temperatures. Maintaining the coolant will allow the
cooling system to work properly and prevent freezing, overheating, and corrosion.
Therefore, the coolant should be frequently checked. The factory provides a 50/50
solution of antifreeze and water in this SSV. This coolant solution is recommended
for most operating temperatures and provides good corrosion protection.

Cooling Bottle Coolant

The coolant bottle is located under the cargo bed at the rear of the vehicle.
1. After removing the cargo bed, observe the liquid level in the bottle.
2. If the liquid level is low, remove the cap and add coolant as needed. Keep the
coolant level between the minimum MIN and maximum markings MAX on the
bottle (Measure when the liquid is cold).
1 2
MAX MIN
3. Unscrew the lid, pour in new coolant, pay attention to observe the position of
the coolant when pouring in, and do not exceed the maximum liquid level.
4. Reinstall the cover.

COOLANT

4-14