Driving With Passengers; Starting The Vehicle; Park The Vehicle - Segway Villain SX10 Owner's Manual

• The operating speed is suitable for your skills, conditions and terrain.
• Do not jump the vehicle or perform any other driving stunts.

Driving with Passengers

1. Complete the new operator driver outlined on page 3-2.
2. Perform pre-drive inspection.
3. Do not carry more than one passenger in a 2-seater vehicle.
4. All riders must be able to sit with their backs on the seat, with their feet flat on
the floor, and their hands on the steering wheel (if driving) or on the passenger
armrest/grab bar.
5. The driver and all passengers must wear helmets, eye protection, gloves, long-
sleeved shirts, trousers, ankle boots and safety belts.
6. When driving this vehicle, make sure that all cab doors are closed and locked.
7. Passengers can only sit in the passenger seat.
8. Slow down. Always travel at a speed appropriate for your skills, your passengers'
skills and operating conditions. Avoid unexpected or aggressive maneuvers that
could cause discomfort or injury to a passenger.
9. Vehicle handling may change with passengers and/or cargo on board. Allow more
time and distance for braking.

Starting the Vehicle

1. Press the brake pedal and do not release it.
2. Turn the ignition switch to the "ON" position
3. When the engine start button is on, press the start button to start the vehicle
engine
Before starting the vehicle, wear riding equipment, make sure the doors are closed,
and both the driver and passengers must wear seat belts.

Park the Vehicle

1. Press the brake pedal and put the shifter in "P"
2. Turn the key to the " OFF " position (page 2-4) and the key can be taken out of
the switch.
3. Put the parking brake handle up(page 2-13)
3-3