Starting The Vehicle; Parking The Vehicle; Braking - Segway FUGLEMAN SGW1000F-U2 Owner's Manual

Starting the Vehicle

1. Depress the brake pedal when the gear is in "P" or "N" gear;
2. Turn the ignition key to "ON" position.
3. Press the Engine switch "
4. Press "Start" button for 1,5 - 2 seconds. Engine will start.
Before starting the engine be sure your wear the helmet and
other safety equipment, ensure the doors / safety nets are closed
and that both driver and passenger have fastened their seat
belts.

Parking the Vehicle

1. Press the brake pedal and put the shifter into "P" position.
2. Turn the key to the " OFF " position (P. 31) and take the key out.
3. Apply parking brake (P. 52)

Braking

1. Release the throttle pedal completely.
When the throttle pedal is released completely and engine rpm slows
down to near idle, the vehicle has no engine braking.
2. Press on the brake pedal evenly and firmly.
3. Practice starting and stopping (using the brakes) until you're
familiar with the controls.
"
NOTICE
71
O P E R A T I O
O P E R A T I O
N
N