CVT SYSTEM
CVT SYSTEM
C C
B B
Drive Belt
Drive Belt Removal
◆ Remove the drive pulley【A】(see Drive Pulley
NOTE
NOTE
Before removing the drive belt, observe the direction
of the informations【A】(Such as manufacturers name
and arrow marks) printed on the belt so that it may be
reinstalled on the pulleys as originally.
A A
◆ Lift the drive belt【B】off the driven pulley【C】.
Drive Belt Installation
Drive Belt Installation
NOTE
NOTE
Be sure the printed information faces the same direction
so the belt rotates in the same direction as originally
installed. When installing a new belt, install it so the
printed information【A】can be read from beside the
vehicle.
◆ Installation is basically the reverse of removal.
◆ Loop the belt【B】over the driven pulley【C】.
◆ Install the drive pulley (see Drive Pulley Installation).
◆ Put the transmission in neutral, and rotate the driven
Drive Belt Inspection
Drive Belt Inspection
◆ Refer to the CVT System in the Periodic
3-6-10
Removal
Removal).
pulley to allow the belt to return to the top【A】of
the sheaves, before measuring belt defl ection.
Maintenance chapter.