Table of Contents
Advertisement
1 Go to the System External I/O menu.
2 Select the Disconnect field.
NOTE:
Example
Using the LAN's X Window Interface
Using the LAN's X Window Interface
To close the interface
From the XWindow Interface or Front Panel
The interface on your Xserver closes, and the Disconnect field changes
to Connect.
From a Remote Computer
• Send the XWIN OFF programming command to the logic analyzer.
Note that simply closing the window that the interface is running in may leave
the logic analyzer hung up.
ftp method
To end the session using ftp, create a second text file with the following
contents:
xwin off<cr>
The second text file is named "stopx". At an ftp command prompt, copy
this file from your local directory to a virtual file called "program" in the
logic analyzer \system directory as follows:
ftp> cd system
ftp> put stopx program
522
Advertisement
Table of Contents
Troubleshooting
