Agilent Technologies HP 1660E Series User Manual page 185

The If event uses either the IMB or the same external clock pod input
lines as the Wait event. If the condition is true at the If event, then the
data in the If block is output, otherwise it is skipped.
The If event takes the current data line and duplicates as in the
following example:
These vectors are now restricted. They cannot have instructions.
Delete and Copy operations that result in instructions being placed on
these vectors will not be allowed. The If can be removed by deleting
either the start or end of the If block.
current data
IF
current data
current data
END IF
current data
These vectors are now restricted. They cannot have instructions.
Delete and Copy operations that result in instructions being placed on
these vectors will not be allowed. The If can be removed by deleting
either the start or end of the If block.
Using the Pattern Generator
Building Test Vectors and Macros
185