Connect
Configure
Ping
Mount
Connecting and Configuring the LAN
Connecting and Configuring the LAN
Connecting and Configuring the LAN
In order to use your logic analyzer's network capabilities, you need to
connect it to your network and configure the logic analyzer.
The following chart shows an overview of the process.
Connect the RJ-45 or BNC
connector from your network, then
turn on the logic analyzer.
Setup the configuration menus.
Verify connectivity with the ping
utility.
Ping OK?
Mount the logic analyzer.
Mount OK?
Ready to use.
498
No
Yes
No
Yes
Go to page 556,
"Troubleshooting the
LAN."
Go to page 556,
"Troubleshooting the
LAN."