Agilent Technologies HP 1660E Series User Manual page 34

Logic Analyzer Overview
HP 1660/70-Series Logic Analyzer
Assign pods*
In the Analyzer Configuration menu, assign the connected pods to the
analyzer you want to use. The number of pods on your logic analyzer
depends on the model. Pods are paired and always assigned as a pair to
a particular analyzer.
* If you load a configuration file, this step is not necessary.
Set up analyzers*
Set modes and clocks
Set the state and timing analyzers using the Analyzer Format menu. In
general, these modes trade channel count for speed or storage. The
state analyzer also provides for complicated clocking. If your state
clock is set incorrectly, the data gathered by the logic analyzer might
indicate an error where none exists.
See Also "The Analyzer Format Menu" on page 307 for more information on
modes and clocks.
Group bits under labels
The Analyzer Format menu indicates active pod bits. You can create
groups of bits across pods or subgroups within pods and name the
groups or subgroups using labels.
34