Time Base - Agilent Technologies HP 1660E Series User Manual

Using the Oscilloscope
Oscilloscope Common Menus

Time base

The s/Div and Delay fields are displayed on all of the oscilloscope
menus, except for the Calibration menu.
s/Div field
The s/Div field allows you to set the sweep speed (time scale) on the
horizontal axis of the display from 500 ps/div to 5 sec/div. Sweep speed
is measured in seconds per division.
Delay field
The Delay field allows you to set the horizontal position of the
displayed waveform in relation to the trigger. Delay time is always
measured from the trigger point on the waveform to the center of the
screen. Delay time is measured in seconds. When acquisitions are
stopped, the Delay field can be used to control the portion of
acquisition memory displayed on screen.
112