To build a user macro
Build macros for sequences of vectors you will want to use in multiple
places. You can then insert these macros in INIT or MAIN sequences.
Give each macro a name that will help you identify its function and
make it easier to select from the list of macros you've built.
1 From the User Macros menu, select the Add/Del Macro field,
then select ADD MACRO.
2 Select the MACRO field, then type the new macro name.
3 Add any desired parameters.
Parameters are set when they are inserted into MAIN or INIT
sequences. For more information on adding parameters, refer to
"Adding parameters" found later in this chapter.
4 Select the Insert field to add as many vectors as needed into the
macro.
5 Highlight the desired vector to modify.
6 Highlight a data field and insert the appropriate data.
Using the Pattern Generator
Building Test Vectors and Macros
163