Hp 1670E-Series Logic Analyzer Description - Agilent Technologies HP 1660E Series User Manual

Logic Analyzer Reference

HP 1670E-Series Logic Analyzer Description

HP 1670E-Series Logic Analyzer Description
The HP 1670E-series logic analyzers are part of a family of general-
purpose logic analyzers. The HP 1670E-series consists of three models
ranging in channel width from 68 channels to 136 channels, with 100-
MHz state and 250-MHz timing speeds. The HP 1670E-series logic
analyzer are designed as full-featured standalone or network-
configurable instruments for use by digital and microprocessor
hardware and software designers. All models have HP-IB, RS-232-C,
Centronics, and Ethernet LAN interfaces for hard copy printouts and
control by a host computer.
Memory depth is 1 M per channel in all pod pair groupings, or 2 M per
channel on one pod of a pod pair in half-channel mode.
Measurement data is displayed as data listings and waveforms, and can
also be plotted on a chart or compared to a reference image. Profiled
data is displayed as histograms of activity by time, state, or address
range.
The 100-MHz state analyzer has master, master/slave, and
demultipexed clocking modes available. Measurement data can be
stamped with state or time tags. For triggering and data storage, the
state analyzer uses 12 sequence levels with two-way branching, 10
pattern resource terms, 2 range terms, and 2 timers.
The state analyzer has a separate mode for State Compare, which
allows you to quickly compare listings.
The 250-MHz timing analyzer has two timing modes with variable
width, depth, and speed selections. Sequential triggering uses 10
sequence levels with two-way branching, 8 pattern resource terms, 2
range terms, 2 edge terms and 2 timers.
254