Using The Lan's X Window Interface - Agilent Technologies HP 1660E Series User Manual

Logic analyzers

Table of Contents

Using the LAN's X Window Interface

This chapter shows you how to:

• Start the interface.

• Close the interface.

• Load the custom fonts.

Using the Mouse and Keyboard

Once you have started the XWindow interface and are displaying it on

your computer running the Xserver, you can use your computer's

keyboard and mouse to control the logic analyzer interface in the same

way you use the logic analyzer's keyboard and mouse. Refer to your

logic analyzer's User's Guide for a complete description of keyboard

and mouse operation.

Duplicating Front-Panel Knob Control

To duplicate turning the knob, hold down the right mouse button, and

move the mouse up or to the right for clockwise knob movement; move

the mouse down or to the left for counter-clockwise knob movement.

You can also use the keyboard's Shift-up or -right arrow keys to

duplicate clockwise knob movement. Use the Shift-down or -left arrow

keys to duplicate counter-clockwise knob movement.