To Use Autoroll - Agilent Technologies HP 1660E Series User Manual

Logic analyzers

Table of Contents

To use Autoroll

When Autoroll is used, each time you complete the process of adding

data to a data field, the data entry focus changes to the next specified

data field. The data entry keypad remains active, ready to define the

next data field.

The following procedure shows you how to use Autoroll:

1 Select the first data field to define.

2 Enter the desired data using the pop-up keypad.

3 Select the Autoroll Off field, then select the desired roll

4 As you continue to enter data and select Done, the data field

focus rolls to the next data field automatically.

Using the Pattern Generator

Building Test Vectors and Macros