Connecting To An Emulation Module; Web Interface - Agilent Technologies E5900B User Manual

Using the Emulator with a Debugger
Several prominent companies design and sell state-of-the-art source
debuggers which work with the Agilent emulation modules and emulation
probes.
Follow the instructions in your emulation or solution User's Guide with the
following differences:

Connecting to an Emulation Module

If you are using an E5901B emulation module, configure your debugger to use
the IP address of the E5900B emulation probe, not the logic analysis system.
You may need to tell the debugger which port number to use. The default port
number for a debugger connection is 6470.
Do not use the Emulation Control Interface at the same time as a debugger.

Web Interface

You can export the display of an Agilent 16700-series logic analysis system to
your PC or workstation using a web browser. See the online help in your logic
analysis system for more information.
60 E5900B / E5901B User's Guide Supplement