Agilent Technologies HP 1660E Series User Manual page 326

Pattern/Edge
Combinations
Time Violations
Logic Analyzer Reference
The Analyzer Trigger Menu
5. Find Nth occurrence of an edge
This macro becomes true when it finds the designated occurrence of a
designated edge. It uses one internal sequence level.
1. Find edge within a valid pattern
This macro becomes true when a selected edge type is seen at the
same time as a designated pattern. It uses one internal sequence level.
2. Find pattern occurring too soon after edge
This macro becomes true when a designated pattern is seen occurring
within a set duration after a selected edge type is seen. It uses three or
four internal sequence levels.
3. Find pattern occurring too late after edge
This macro becomes true when one selected edge type occurs, and for
a designated period of time after that first edge is seen, a pattern is not
seen. It uses two internal sequence levels.
1. Find 2 edges too close together
This macro becomes true when a second selected edge is seen
occurring within a designated period of time after the occurrence of a
first selected edge. It uses three or four internal sequence levels.
2. Find 2 edges too far apart
This macro becomes true when a second selected edge occurs beyond
a designated period of time after the first selected edge. It uses two
internal sequence levels.
326