Using the Trigger Menu
Specifying a Basic Trigger
To assign terms to an analyzer
When you turn the logic analyzer on, Analyzer 1 is named Machine 1
and Analyzer 2 is off. Because trigger terms can only be used by one
analyzer at a time, all the terms are assigned to Analyzer 1. If you plan
to use both analyzers in your measurement, you need to assign some of
the terms to Analyzer 2.
1 Go to the Trigger Machine 1 menu.
If you have renamed Machine 1 in the Analyzer Configuration menu,
the name you changed it to will appear in the menu instead of Machine
1.
2 Select a term.
The terms are the fields below the roll field "Terms". See the figure
below.
3 Select Assign from the list that appears.
The Resource Term Assignment menu appears. It is divided into two
sections, one for each analyzer. All terms are listed.
76