Table of Contents
Advertisement
Accessing the Logic Analyzer File System Using the LAN
Accessing the Logic Analyzer File System Using the LAN
To access the file system via ftp
To access the logic analyzer's file system using ftp, enter the following
command on your computer:
ftp [symbolic name|IP address]
The symbolic name is the host name of the logic analyzer as set up by
your system administrator. Typically, this name is found in the hosts file
on your computer or returned by a name server. It is equivalent to the
analyzer's IP (Internet Protocol) address.
When the connection is made, you will be prompted for a login name.
Enter "control" or "data" depending on the type of access you want.
If you are prompted for a password, just press the Return or Enter key.
There is no password protection built into HP logic analyzers.
Example
Using ftp
To access the file system of the logic analyzer named 1670sys using ftp
enter:
ftp 1670sys
login name: data
ftp>
The exact commands you use within ftp depend on the software. If you
are not familiar with your ftp software, type "?" or "help" at the ftp
prompt to see a list of commands.
514
Advertisement
Table of Contents
Troubleshooting
