Introducing The Lan Interface - Agilent Technologies HP 1660E Series User Manual

Logic analyzers

Table of Contents

Introducing the LAN Interface

The HP Logic Analyzer LAN interface lets you connect your logic

analyzer to an Ethernet network that uses TCP/IP. With the LAN

Interface, you can:

• Set up and run measurements using the logic analyzer's XWindow

• Copy measurement data from the logic analyzer to your computer using

File Transfer Protocol program (ftp) or Network File System (NFS).

• Save and restore configurations.

• Program the logic analyzer.

Requirements

In order to use your HP 1660/70 logic analyzer on the LAN, you need

the following equipment and software:

• Ethernet local area network using TCP/IP protocol.

• If you are using a PC, NFS program or ftp program.

• If you want to use the logic analyzer's XWindow interface, Xserver

program running on your computer.

Characteristics

Physical Connection.

• RJ-45 connector for direct connection to 10Base-T ("ethertwist") networks

• BNC connector for direct connection to 10Base2 ("thinlan") networks