Troubleshooting The Logic Analyzer - Agilent Technologies HP 1660E Series User Manual

Logic analyzers

Table of Contents

Troubleshooting the Logic Analyzer

Occasionally, a measurement may not give the expected results. If you

encounter difficulties while making measurements, use this chapter to

guide you through some possible solutions. Each heading lists a

problem you may encounter, along with some possible solutions. Error

messages which may appear on the logic analyzer are listed below in

quotes " ". Symptoms are listed without quotes.

If you still have difficulty using the analyzer after trying the suggestions

in this chapter, please contact your local Hewlett-Packard Service

When you are working with the analyzer, be sure to power down both the

analyzer and the target system before disconnecting or connecting cables,

probes, and analysis probes. Otherwise, you may damage circuitry in the

analyzer, analysis probe, or target system.