The Sequence Menu - Agilent Technologies HP 1660E Series User Manual

Using the Pattern Generator
Building Test Vectors and Macros

The Sequence Menu

Use the Sequence menu to build your test vector files. There are two
sequences, an initialization sequence and a main sequence.
In single run mode, the vectors are output from the first vector in the
initialization sequence to the last vector of the main sequence. The last
vector of the main sequence will be held at the outputs until run is
executed again.
In repetitive run mode, the vectors in the initialization sequence will be
output from first to last one time, then the main sequence will
repetitively output the vectors in the sequence until the stop field is
pressed. The vector being output when stop is acknowledged by the
module will be held at the outputs until run is executed again.
The initialization sequence can be empty in which case it will be
ignored. The main sequence must contain at least two vectors to
output.
Sequence Menu
178