Using the X Window Interface
To close the interface
To close the interface
From the X Window Interface or Front Panel
Go to the System External I/O menu.
1
Select the Disconnect field.
2
The interface on your X server closes, and the Disconnect field changes to
Connect.
From a Remote Computer
•
Send the XWIN OFF programming command to the logic analyzer.
Note that simply closing the window that the interface is running in may leave
the logic analyzer hung up.
Example
Pseudo–telnet method using a UNIX computer
If you closed the initial telnet connection, enter the following command to
connect to the command parser socket of the analyzer named 1660sys:
telnet 1660sys 5025
To close the X Window interface, enter:
xwin off
3-8