Table of Contents
Advertisement
Logic Analyzer Reference
Probing
Probing
This section discusses the probing system for the logic analyzer. It also
contains the information you need for connecting the probe system
components to each other, to the logic analyzer, to the oscilloscope, to
the pattern generator, and to the system under test.
Probing Options
You can connect the logic analyzer to your system under test in one of
the following ways:
• Microprocessor- and bus-specific interfaces (optional).
• Standard general-purpose probing (provided).
• Direct connection to a 20-pin, 3M-Series type header connector using the
optional termination adapter.
Accessories for HP Logic Analyzers for additional information about
See Also
the microprocessor interface kits and for any new probing solutions.
258
Advertisement
Table of Contents
Troubleshooting
