Accessing The Logic Analyzer File System Using The Lan - Agilent Technologies HP 1660E Series User Manual

NOTE:

Accessing the Logic Analyzer File System Using the LAN

Accessing the Logic Analyzer File System Using the LAN
Accessing the Logic Analyzer File System Using
the LAN
This chapter shows you how to:
• Mount the file system via NFS.
• Access the file system via ftp.
This chapter assumes that the logic analyzer is physically connected to your
local area network. If it is not connected, refer to Chapter 1 for information on
how to connect the system.
Control User vs. Data User
You can access the logic analyzer file system as either the control user
or a data user.
Control User
• The control user can send programming commands.
• The control user has read and write access to the file system.
• There can only be one control user at any time.
Data User
• The data user cannot send programming commands.
• The data user has read access to the entire file system, but can only write
to \system\disk\hard and \system\disk\flexible directories (the logic
analyzer disk drives).
• Multiple data users can access the logic analyzer simultaneously.
Password and File Protection
There is no password protection built into the logic analyzer. This
means that files are not protected against either deletion or being
written over.
508