To Build A Main Vector Sequence - Agilent Technologies HP 1660E Series User Manual

To build a main vector sequence

During a single run, the program vectors in the MAIN SEQUENCE are
output to the system under test in an order of first vector to last vector.
The data of the last vector is then held until run is selected again.
During a repetitive run, the MAIN SEQUENCE loops until stop is
selected.
1 From the Sequence menu, use the knob to highlight the first data
row.
2 Select the Insert field once for each line of vectors you want
inserted into the main sequence.
These new lines of vectors provide fields to place data into for each
label.
3 Select the data field, then type in a data value.
If you will be adding data in many fields, use the Autoroll feature. Refer
to "To use Autoroll" later in this chapter.
Using the Pattern Generator
Building Test Vectors and Macros
157