To Load The Custom Fonts - Agilent Technologies HP 1660E Series User Manual

To load the custom fonts

1 From the computer running your Xserver software, access the
logic analyzer's file system.
Refer to the "Accessing the Logic Analyzer File System" chapter.
2 Copy the SM165.BDF and LG165.BDF files from the analyzer's
\system\disk\hard\system directory to a directory on your
computer.
3 Set up the Xserver so that it can read these fonts.
Refer to your XWindows server documentation for instructions on
loading and using custom fonts. Generally, the steps you will take are:
a Compile the .BDF files into the proper format.
b Build the font directory (FONTS.DIR) file.
c If the font directory is not in the current font path, add the
new directory to the font path.
The custom fonts make the analyzer's XWindow interface look identical
to the instrument's display. If the custom fonts are not loaded, you will
see odd characters in place of arrow symbols and may see out-of-
bounds text in the XWindow image.
Using the LAN's X Window Interface
Using the LAN's X Window Interface
523