7. Inspect the Rear Panel Feature
Check the GPIB Interface
If the unexpected operations appear when controlling the E4915A/E4916A with an external
controller, perform the following checks to verify the problem is not with the controller.
Compatibility, must be HP 9000 series 200/300/700, see the manuals of the controller and the
BASIC system.
GPIB interface hardware must be installed in the controller, see the manuals of the controller
and the BASIC system.
I/O and GPIB binaries loaded, see the manuals of the BASIC system.
Select code, see the manuals of the BASIC system.
GPIB cables, see the manuals of the BASIC system.
Programming syntax, see the manuals of the BASIC system.
3-6 Troubleshooting