Table of Contents
Advertisement
Logic Analyzer Reference
The Waveform Menu
Viewing state values in the bus option
When all assigned waveforms in a label are overlaid with the Bus
option, the value of the data is displayed in the base selected in the
Listing menu to the right of each new transition in the waveform
display. This happens only when the waveform size is set to large.
If the sec/Div is set to view a large increment of time, or the waveform
scaling is set to small or medium, the state data readout does not fit
between transitions. To display the state data readouts within the
waveform, expand the sec/Div and use the large waveform setting.
347
Advertisement
Table of Contents
Troubleshooting
