Agilent Technologies HP 1660E Series User Manual page 501

Connecting and Configuring the LAN
Connecting and Configuring the LAN
2 Set up the LAN Settings menu.
LAN Settings menu
Lan Port . The LAN Port toggles between LAN TP and LAN BNC. Set
it to whichever type you are using for the connection.
Analyzer IP Address. TCP/IP uses the Internet Protocol (IP)
Address for communication between network nodes and requires this
entry. Each IP address on a network must be unique - contact your
system administrator if you need to have one created for the logic
analyzer. The logic analyzer responds to messages sent to this IP
address.
Gateway IP Address. Gateways act as connections between different
physical subnets. If the logic analyzer is on a different subnet than the
computer you wish to use it with, you need to enter a gateway address.
501