Accessing the Logic Analyzer File System
To access the file system via ftp
To access the file system via ftp
To access the logic analyzer's file system using ftp, enter the following
command on your computer:
ftp [symbolic name|IP address]
The symbolic name is the host name of the logic analyzer as set up by your
system administrator. Typically, this name is found in the hosts file on your
computer or returned by a name server. It is equivalent to the analyzer's IP
(Internet Protocol) address.
When the connection is made, you will be prompted for a login name. Enter
"control" or "data" depending on the type of access you want.
If you are prompted for a password, just press the Return or Enter key.
There is no password protection built into Agilent Technologies logic
analyzers.
Example
Using ftp
To access the file system of the logic analyzer named 1670sys using ftp enter:
ftp 1670sys
login name: data
ftp>
The exact commands you use within ftp depend on the software. If you are
not familiar with your ftp software, type "?" or "help" at the ftp prompt to see
a list of commands.
2-8