Table of Contents
Advertisement
Installation
Connecting the Accessories
Connecting a LAN Cable
When using a LAN (local area network), follow the procedure below to connect the
E5070A/E5071A to the LAN.
Step 1. By referring to Section "Configuring the Network" in the E5070A/E5071A User's Guide,
set the E5070A/E5071A LAN.
Step 2. As shown in Figure 2-7, connect a LAN cable to the LAN port on the rear panel of the
E5070A/E5071A.
Figure 2-7
Connecting the LAN cable
NOTE
When connecting the E5070A/E5071A to a LAN for use, consult the network
administrator about proper LAN settings.
Do not connect a LAN cable until the proper LAN settings have been completed.
Connecting the E5070A/E5071A to a LAN with improper settings may cause a problem in
the network.
26
Chapter 2
Advertisement
Table of Contents
