Time Base - Agilent Technologies 1670G Series User Manual

Logic analyzers

Hide thumbs Also See for 1670G Series:

Table of Contents

Using the Oscilloscope

Oscilloscope Common Menus

Time base

The s/Div and Delay fields are displayed on all of the oscilloscope

menus, except for the Calibration menu.

The s/Div field allows you to set the sweep speed (time scale) on the

horizontal axis of the display from 500 ps/div to 5 sec/div. Sweep speed

is measured in seconds per division.

The Delay field allows you to set the horizontal position of the

displayed waveform in relation to the trigger. Delay time is always

measured from the trigger point on the waveform to the center of the

screen. Delay time is measured in seconds. When acquisitions are

stopped, the Delay field can be used to control the portion of

acquisition memory displayed on screen.