Advertisement
Troubleshooting
Displayed Error Messages
CHECK AUTO-DIALING
NO FILE EXISTS
TOO MANY DEST.
USED AS GROUP
USED AS DIAL
USED AS DIAL OPTION
USED AS GROUP KEY
NOT PROGRAMMED
ALREADY PROGRAMMED
PLEASE SET PAUSE
TONER LOW
ADD TONER
ADD PAPER
CLEAR ORIGINAL
CLEAR COPY
CLOSE COVER
SERVICE CALL ©-©© H
j
CHECK PAPER SIZE
62
You cannot use the auto-dialer at the moment. Use the ten-key
pad or the handset.
No polling reception operations have been programmed.
There are no messages in memory waiting for transmission.
Incorrect file number. Check the file number and try again.
The memory cannot hold any more telephone numbers.
Either: Delete some numbers then try again.
Or: Wait until some of the Send Later or other delayed
transmissions waiting in memory have been carried out, then try
again.
This Quick Dial Key has a Group stored in it.
This Quick Dial Key has a telephone number stored in it.
This Quick Dial Key is programmed as Dial Option Key.
This Quick Dial Key is programmed as Group Key
This Quick Dial Key or Speed Dial Code does not contain a
number.
Either:This number is already included in this Group.
This RTI/CSI has already been stored for use with this feature.
You must add a pause after your area code when you input your
fax terminal's own telephone number.
Toner has nearly run out. You can still make copies but must
change the cartridge soon.
The toner cartridge is empty. Install a new cartridge.
The cassette is now empty.
A document is jammed in the feeder.
Paper is jammed in the printer.
A cover is not closed properly. Check that all covers are closed.
Machine is out of order. Contact your service
representative. Be sure to write down the code numbers
and have it handy when you call for service.
The size of the installed paper does not match the
currently selected paper size.
Set the paper size (see page 82) or install the appropriate
paper.
Displayed Error Messages
Advertisement
