Changing The Code Of The Service Intervals; Inspecting Headlight Beam Setting And Adjusting If Necessary; Inspecting Headlight Beam Setting And Adjusting If Nec- Essary - Skoda Octavia III 2013 Service Manual

Hide thumbs Also See for Octavia III 2013:
Table of Contents

Advertisement

Octavia III 2013 ➤ , Octavia III 2014 ➤
Maintenance - Edition 12.2014
6.12
Changing the code of the service inter‐
vals
These tasks are carried out using the vehicle diagnosis, measur‐
ing and information system -VAS- together with the correspond‐
ing diagnostic cable ⇒ Vehicle diagnostic tester.
– On the diagnostic device, select: "Test plan" → "Bodyshell" →
"Electrical system" → "01 Self-diagnosable systems" → "Dash
panel insert - J285" → "Functions of the dash panel insert" →
"17- Service events" and next "Change fixed/variable inter‐
vals".
– Continue to follow the instructions on the diagnostic unit.
WARNING
Note the following conditions when coding the service inter‐
vals:
Vehicles with QI6 by default can be recoded to QI1 - QI4 under
the following conditions:
Carry out when changing the oil during "Öl change service" or
"Inspection".
Carry out the recoding using the diagnosis device.
A recoding to QI6 is possible subject to the conditions:
Carry out when changing the oil during "Öl change service" or
"Inspection".
Carry out the recoding using the diagnosis device.
Use prescribed engine oil.
Vehicle meets prescribed specifications (original battery...)
WARNING
Vehicles with QI1 - QI4 factory preset cannot be recoded to
QI6.
6.13
Inspecting headlight beam setting and
adjusting if necessary
Special tools and workshop equipment required
♦ Headlight beam setting device
In principle the following inspection and setting description ap‐
plies for all countries. However, comply with national guidelines
and legislation of the relevant country ⇒ Operating instructions
for the headlight beam setting device .
Test and setting conditions
Tyre pressure o.k.
Lenses must neither be damaged nor soiled.
Reflectors and bulbs o.k.
Vehicle load must be achieved.
Load: with one person or 75 kg on the driver's seat in an otherwise
unladen vehicle (unladen weight).
138
6. Electrical System

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Octavia iii 2014

Table of Contents