CPI Indico 100 Series Service And Installation Manual page 88

2
Installation
2.19.2 Menu Selections (Cont)
GEN CONFIGURATION
Allows the service engineer to access the following functions. Further details are in chapter 3C.
•
TUBE SELECTION
•
GENERATOR LIMITS
•
RECEPTOR SETUP
•
I/O CONFIGURATION
•
AEC SETUP
•
AEC CALIBRATION
•
FLUORO SETUP
•
TUBE CALIBRATION
DATA LINK
Used with the CPI GenWare™ utility software. This allows for data communication with a computer in
order to download additional tube types, transfer APR data, run the A
functions. Further documentation is included with the software package in the form of an MS WORD
document (MANUAL.DOC).
A computer (i.e. laptop) and a 9 pin null modem cable with socket connectors (female) on both
ends are required to run this software and interface to the generator.
Page 2-36
Selects from the available group of X-ray tubes.
Sets the operating limits of the generator.
Allows programming of each image receptor.
Allows setting the inputs and outputs of all image receptors.
Defines properties for each channel of the AEC device.
Allows calibration of the AEC device.
Allows setting of the fluoro properties.
Enables the X-ray tube auto calibration feature.
Rev. H Indico 100 Series Service Manual
CPI Canada Inc.
2 2
 utility, and for other minor
EC
Ch # 740895-04