3C
Programming the Generator
3C.5.7 Fluoro Setup
Refer to chapter 3 section 3E, ABS CALIBRATION.
3C.5.8 Tube Calibration
Refer to chapter 2, the section TUBE AUTO CALIBRATION.
3C.6.0 DATA LINK
This is used with the CPI GenWare utility software. This allows for data communication with a computer
in order to download additional tube types, transfer APR data, run the A
functions. Further documentation is included with the software package in the form of an MS word
document (MANUAL.DOC).
A computer (i.e. laptop) and a 9 pin null modem cable with socket connectors (female) on both
ends are required to run this software and interface to the generator.
Page 3C-20
Rev. B
Millenia / Indico 100 Series Service Manual
CPI Canada Inc.
2
2
utility, and for other minor
EC
Ch # 740904-05