5.0 Generator Configuration - CPI Indico 100 Series Service And Installation Manual

CPI Canada Inc.
3C.4.0 APR EDITOR (cont)
NOTE: APR TEXT MAY BE ALTERED BY USING A COMPUTER RUNNING THE CPI GenWare
UTILITY SOFTWARE. FURTHER DOCUMENTATION REGARDING THIS FUNCTION IS
INCLUDED WITH THE SOFTWARE PACKAGE IN THE FORM OF AN MS WORD DOCUMENT.
3C.5.0 GENERATOR CONFIGURATION
The GEN CONFIGURATION menu presents the user with 9 options as shown below. Select one of these
options to access the corresponding menu.
TUBE SELECTION
GENERATOR LIMITS
RECEPTOR SETUP
I/O CONFIGURATION
EXIT
3C.5.1 Tube Selection
The TUBE SELECTION menus allow the desired tube type to be selected and assigned to TUBE 1 and to
TUBE 2 (two tube generators only), and allow setting of the default limits for that tube.
This menu will not be displayed on one-tube generators.
TUBE 1
TUBE 2
EXIT
The next three menus display the default tube selections. Selections may not be
exactly as shown.
A192B 0.6/1.2
A256 0.6/1.0
A292 0.6/1.2
A272 0.3/0.6
RETURN
RAD14 0.6/1.2
RAD21 0.6/1.2
RAD56 0.6/1.2
RAD60 0.6/1.2
<<
Millenia / Indico 100 Series Service Manual
* GEN CONFIGURATION *
*TUBE SELECTION *
* TUBE 1 SELECTION *
G256 0.6/1.0
G292 0.6/1.2
G1082 0.3/1.0
RAD8 1.0/2.0
* TUBE 1 SELECTION *
RAD74 0.6/1.5
RAD92 0.6/1.2
DX10HS 0.6/1.0
DX92HS 0.6/1.2
Ch # 740904-05
Programming the Generator
AEC SETUP
AEC CALIBRATION
FLUORO SETUP
TUBE CALIBRATION
>>
>>
Rev. B
3C
   
Page 3C-7