Download Print this page

5.2 Weight Label; 5.3 Dc Bus Label - CPI Indico 100 Series Service And Installation Manual

Hide thumbs Also See for Indico 100 Series:

Advertisement

1B
Safety
1B.5.2 Weight Label
MILLENIA:
INDICO 100:
1B.5.3 DC Bus Label
MILLENIA:
INDICO 100:
WARNING:
WAIT A MINIMUM OF 5 MINUTES AFTER THE INPUT MAINS POWER HAS BEEN REMOVED
BEFORE REMOVING ANY COVERS OR ACCESS PANELS. ONCE THE COVER(S) /
PANEL(S) ARE REMOVED CHECK THAT THE VOLTAGE ACROSS THE DC BUS
CAPACITORS IS LESS THAN 48 VDC BEFORE SERVICING.
Page 1B-6
This label is attached to the upper and lower generator cabinets and to the HT oil tank
and states the approximate weight of each of the generator sections and of the HT oil
tank. This label cautions against attempting to lift those assemblies without proper
assistance.
This label is attached to the lower generator cabinet and to the HT oil tank and states the
approximate weight of the lower generator cabinet and of the HT oil tank. This label
cautions against attempting to lift those assemblies without proper assistance.
This label is attached to a cover over the DC bus capacitors. These capacitors will hold a
lethal charge for 5 minutes after the console is switched off, or the main disconnect is
switched off. Do not remove the cover for a minimum of 5 minutes after the power has
been switched off.
This label is attached to the removable panels on the lower (power supply) cabinet. The
internal capacitors will hold a lethal charge for 5 minutes after the console is switched off,
or the main disconnect is switched off. Do not remove the cover for a minimum of 5
minutes after the power has been switched off.
Rev. D
Millenia / Indico 100 Series Service Manual
CPI Canada Inc.
Ch # 740904-01

Advertisement

loading