3.1 Setting Time And Date; 3.2 Error Log - CPI Indico 100 Series Service And Installation Manual

3C
Programming the Generator
3C.3.1 Setting Time And Date
The SET TIME & DATE menu allows changing or setting of the time and date.
YEAR: 2000
MONTH:
DAY:
EXIT
Use these steps to set the time and date.
Step
1.
2.
3.
4.
5.
6.
7.
3C.3.2 Error Log
The ERROR LOG menu allows the display of error messages stored in the generator's error log.
Parameters such as kV, mA, time, receptor, focus, tech selection, field, film screen and fluoro
parameters will be displayed simultaneously on the console LED displays.
ERROR # 1 OF 18
DATE: 8-19-2000
ERROR CODE: 200
ERROR MESSAGE: ANODE HEAT WARN
EXIT
Use these steps to access the error log.
Step
1.
2.
3.
Page 3C-4
* SET TIME & DATE *
9
15
From the UTILITY menu, select SET TIME & DATE.
Select YEAR and press the + or - buttons to set the year.
Select MONTH and press the + or - buttons to set the month.
Select DAY and press the + or - buttons to set the date.
Select HOUR and press the + or - buttons to set the hour (in 24 hour format).
Select MIN and press the + or - buttons to set the minutes.
Select EXIT to return to the UTILITY menu.
* ERROR LOG *
Action
From the UTILITY menu select ERROR
LOG.
Select ERROR # and press the + or -
buttons to scroll through the error log.
Select EXIT to return to the UTILITY
menu.
Rev. B Millenia / Indico 100 Series Service Manual
HOUR: 18
MIN: 29
+
Action
TIME: 13:09
+
The error code, error message, date and
time of the error will be displayed in the
LCD window,
parameters will be displayed on the
console displays.
CPI Canada Inc.
-
-
Result
and the associated
Ch # 740904-05