5.4 I/O Configuration - CPI Indico 100 Series Service And Installation Manual

3C
Programming the Generator
3C.5.3 Receptor Setup (cont)
5.
6.
7.
8.
3C.5.4 I/O Configuration
The I/O CONFIGURATION menus allow programming the states of exposure for the inputs and the
outputs on the room interface board.
REMOTE EXP :
REMOTE PREP:
REMOTE FL. EXP:
CONSOLE EXP:
CONSOLE PREP:
TOMO EXP:
REM. TOMO SEL.:
I/I SAFETY:
COLL. ITLK:
BUCKY CONTACTS:
SPARE:
THERMAL SW 1:
THERMAL SW 2:
DOOR ITLK:
MULTI SPOT EXP:
Page 3C-16
Certain selections are toggled (press the selection button again to change the
value), other parameters must be selected via the adjacent selection button.
The values are then changed using the + and - buttons.
When finished setting the parameters and/or defaults for the current receptor,
press the << or EXIT button(s) as required to return to the GEN
CONFIGURATION menu.
Reselect RECEPTOR SETUP, then select the next receptor to be programmed.
When finished programming
CONFIGURATION menu as per step 6.
* INPUTS [sym] *
...__...__...
...__...........
.............---
...---...---...
⇑
EXIT
* INPUTS [sym] *
...---.........
........ ---...
---............
...---...------
⇑
<<
* INPUTS [sym] *
...---...------
.........---...
------...------
------...------
⇑
<<
* INPUTS [sym] *
-----...-----
----- ...-----
---............
⇑
<<
Rev. B Millenia / Indico 100 Series Service Manual
all receptors, return
STANDBY STATE
>>
STANDBY STATE
>>
STANDBY STATE
>>
STANDBY STATE
>>
CPI Canada Inc.
to the GEN
Ch # 740904-05