1B
Safety
1B.7.5 HT Tank - Transformer Terminals
This notice is printed on the HT oil tank lid and indicates that if the power supply inverter leads that attach
to the high tension transformer primary terminals are not connected the generator must not be energized.
This notice also cautions against over tightening the nuts on the transformer feedthrough terminals
mentioned in the above paragraph.
1B.7.6 Danger High Tension
This notice is printed on the HT oil tank lid. High voltage may be present at the primary terminals on the
tank lid board, at the output high voltage connectors, and at the mA/mAs measuring jacks if the shorting
link is opened for mA/mAs measurements.
Page 1B-14
Rev. D
Millenia / Indico 100 Series Service Manual
CPI Canada Inc.
Ch # 740904-01