1.0 Introduction - CPI Indico 100 Series Service And Installation Manual

3B
System Interfacing
3B.1.0 INTRODUCTION
The Indico 100 generator may be interfaced to various tables, imaging systems, tube stands, tomographic
devices, AEC pickups, Buckys, ABS pickups, X-ray tubes and collimators.
The generator interface may be programmed to supply a voltage, an isolated contact, receive a
voltage, or an external isolated contact.
All interfacing cables enter the generator at the rear of the generator cabinet.
NOTE: The installer must provide the necessary interfacing cables.
WARNING
NOTE: The generator interface board has 110 and 220 VAC present at all times that the main
disconnect is switched ON. Use caution when servicing this board.
Page 3B-2 Rev. E Indico 100 Series Service Manual
CPI Canada Inc.
Ch # 740895-05