Nortel DMS-100 Series Maintenance Manual page 616

8-250 Common card replacement procedures
Replacing a line card Replacing a line card
6
7
297-8211-550 Standard 05.01 August 1999
(end)
(continued)
Replace the faulty card using the following steps:
a. Remove the replacement card from its ESD container.
b. Slide the card in shroud guide slots toward the drawer backplane.
c.
Hold the front cover of the line drawer with your left hand to steady it.
d. Grasp the top and bottom edges of the card with the fingers of your right
hand.
e. Push the card toward the backplane until it plugs fully into the backplane
socket.
You have completed this procedure. Return to the main procedure that sent
you to this procedure and continue as directed.