Nortel DMS-100 Series Maintenance Manual page 499

20 If you were directed to this procedure from the Alarm Clearing Procedures,
return now to the alarm clearing procedure that directed you here. Otherwise,
continue with step 21.
At the MAP terminal
21 Determine which procedure to use to return the line subgroups to service.
If the card you are replacing is
NT6X54AA
NT6X54DA
22 Return the line subgroups to service by typing
>RTS DRWR lsg
and pressing the Enter key.
where
lsg is one of two line subgroups (0 through 19) associated with the drawer
Note: Repeat this step for the other line subgroup associated with the line
drawer.
If RTS
passed
failed
23 Return the line subgroups to service by typing
>RTS DRWR
and pressing the Enter key.
If RTS
passed
failed
24 Send any faulty cards for repair according to local procedure.
Specific card replacement procedures 8-133
DMS-100 Family OPAC Maintenance Manual XPM12 and up
LCM
Do
step 22
step 23
Do
step 24
step 26
Do
step 24
step 26
NT6X54
(continued)